5 to 20 times faster than traditional methods. The vacuum drying technique can be used to meet all requirements quickly.
Drying Quality:
Compliance with requested final moisture value homogeneity of the wood moisture. No deformations in the dried wood.
Flexibility:
The small-capacity cells optimize drying thanks to the possibility of creating wood loads with homogeneous (wood type – initial moisture - thickness).
Versatility:
The vacuum drier is very versatile and can be used as a production machine and to complement traditional driers.
Reliability:
Our driers offer extended service life that is guaranteed by: The use of the best components (for example: Siemens vacuum pumps …) The cell built with AISI 304 stainless steel, which guarantees excellence resistance against aging corrosion.
Operation:
Equipment to ensure completely automatic (computers) Or semi-automatic operation of the drying process make the use of our driers very simple functional and thus do not require any skilled labour.
Installation and start-up
Fast and simple: half a day for press driers (which only need to be connected too the power source and the water mains).
In addition, since the vacuum drier is a "drying machine", it is easy to transport when changes are made to the plant internal organization.
The modern technology applied in the workshops has resulted in the optimission of the use and machining times of the raw materials.
Therefore, the drier must be considered as a machine which is a part of production, guaranteeing a real saving on the raw material and on the quality of finished product.
To dry quickly and without defects in the objective we made a lot of researches and studies into the application of vacuum systems.
The results we have achieved are of two kinds:
• Quantitative:
1- Increasing speed in the drying process compared with traditional systems.
2- Operating costs reduction.
3- Reduction of storage volumes of material being dried.
• Qualitative:
1- Maximum homogeneity of final humidity.
2- Maximum reduction of cracking and warping defects.
3- Maximum of the natural characteristics of wood (colours, knots, etc.).
